Aryol Prefab

TECHNICAL SPECIFICATION OF ECONOMICAL TYPE STEEL PANEL PREFABRİCATED BUILDING


Standarts: TSE, DIN and TS EN ISO 9001:2000 standards are applied.

Dimensions: Building width: optional 5.16 m, 6.43 m, 7.69 m, 8.96 m, 10.22 m, 11.49 m.
Building length: optional, multiplies of 1.265 m.
Inner height: 2.48 m.

Structural System: Durable to the worst conditions: Snow load: 184
Wind load: 130km/hour
1st Degree Eartquake Conditions (Loads TS 498)

Colums: Outer columns: 5mm thick 50 T profile
Column caps: 2.0mm thick electrostatic powder coated galvanized steel sheet
Inner columns: 1.5mm thick H profile formed from 55 double U (DKP)

Roof Trusses: Trusses are placed parallel to building length with spaces of 1265mm.
Upper chord: 3mm U profile
Verticals and diagonals: 1.5mm (DKP)
Bottom chord: (depending to the building widths) 1.5mm or 3mm omega profile

Wall Panels: are designed for very cold and very hot weather conditions.
Inner and outer panel thickness: 50 mm
Inner and outer panel height: 2500 mm
Panel Width: 1250 mm.
Outer panel outer surface covering: 0.60 mm thick, electrostatic powder coated flat galvanized steel sheet (Coat Coil Rall 9002)
Outer panel inner surface covering: 5mm ceopan
Outer panel insulations: 45mm Polystyrene (16kg/m3-0.039W/mk) (DIN 4102-1-B1)
Inner panel surface covering: 5mm ceopan
Inner panel insulations: 41mm Polystyrene (16kg/m3-0.039W/mk) (DIN 4102-1-B1)

Roof: 0.50 mm trapezoid, one-piece 27/200 galvanized steel sheet (fringes on two sides)

Ceiling: Insulation: Glass wool bat (18kg/m3-0.88m2.h.C/kcal)
Covering: 12.5mm plaster board suspended ceiling, green plaster board on wet areas.

Outer doors: Dimensions 900 mm x 2000 mm;
Door frame: 1.2mm galvanized steel;
Surface: electrostatic powder coated 0.70mm steel sheet RAL 9002;
Insulation: 50 mm polystyrene (30kg/m3)
Locks: Kale 1st quality.
Handles: Imat 1st quality spring type aluminum white

Inner doors: Dimensions 830 mm x 1960 mm
Door frame: 1.2mm DKP;
Surface: American panel RAL9002
Locks: Kale 1st quality.
Handles: Imat 1st quality spring type aluminum white

Windows: Big windows (PVC based): 1250x1000mm, mid-divided, one wing opens.
Small windows (PVC based): 1250x500mm, mid-divided, one wing opens.

General Information: Total weight is 80kg/m2. Unloading and assembling is done by workers. Walls don’t bear any loads, they only carry themselves. Building is connected to the foundation by anchorages. Anchorages are embedded into concrete by 20cm. Anchorages are connected to each other with steel components under the building. Bolts and nuts are galvanized. Metal surfaces are painted with double layered rapid undercoat.

Upon Request: Window glasses (Isıcam) double layer: 4+12+4 one layer: 4mm
Outer and iner wall paint: Haskan Doruk 1st quality white
Electricity system: (with TSE 1st quality) NYM Antigron cables: (Under ceiling or over the walls)
Wet Areas switch and power sockets: Metesan, Demirbağ, Viko or equivalent
Fittings: Tekap, Pelsan or equivalent
Fuses: Legrand, BBC, Siemens or equivalent (Electricity wiring outer connections, electric power meter, grounding, splitters are liable by the customer.
Sanitary installations (with TSE 1st quality): Clean water pipes: Fırat PPRC based white or grey, Waste pipes: PVC Fırat double. Wash basin, water closet with reservoir: Nurvit or equivalent, Fittings: BMS or equivalent, Shower cabins: 80x80 Mermerit, Shower curtain.
(Sanitary installations out of the building, water meter are liable by the customer.)
Pvc Rain eaves: Fırat
Kitchen cabinets: As Mutfak;
Bottom cabinets: Depth: 50cm, height: 88cm, mid-shelved, length 100 cm, adjustable plastic base legs.
Top cabinets: Depth: 330cm, height: 70cm, mid-shelved, length 100 cm
Counter & sink: Mermerit coated, doors are white fiberboard and sides are PVC